Warning: Last items in stock!
You are buying from a registered Hagstrom Dealer with full warranty backup
Introduced as the Concord bass in 1965, Hagstrom’s Viking bass injects some tactfully chosen vigour into an all-time classic design. From 60’s Brit-rock to modern day low-end goodness, the Viking bass delivers ear-candy galore
This meticulously crafted semi-hollow bass with a short 30.75-inch (781 mm) scale is fitted with Hagstrom’s custom-voiced Dyna-Rail humbucking pickups. A brilliantly designed 6-way rotary switch allows switching between various humbucking and single-coil configurations for a dizzying array of tonal options:
Pickup Selector: 6-Way Rotary
1 - Neck + Bridge, Single coil (Outer coils)
2 - Bridge, Single Coil (Outer Coil)
3 - Neck, Single Coil (Outer Coil)
4 - Neck + Bridge, Humbucking
5 - Bridge, Humbucking
6 - Neck, Humbucking
VIKING BASS STANDARDS:
All Hagstrom electric guitars and basses include our patented H-Expander truss rod. Providing tension at both ends and running the entire length of the neck, the rigid yet light-weight alloy truss rod allows for a very low action and thin neck, two factors that were instrumental in earning Hagstrom its reputation as the world's fastest playing guitar. The H-Expander truss rod not only provides ultimate neck stability, but it also contributes to Hagstrom's unique tone. Longer sustain and a round attack are some of the sonic characteristics the H-Expander adds to the tonal essence of Hagstrom.
The classic Viking trapeze stringholder/-tailpiece design is a work of art in itself. Right underneath the top part, where the two beautifully swept beams meet, it features a string claw for easy access and super comfortable string changes. Adorned with the legendary Hagstrom crest it truly is elegance defined.
Hagstrom uses a variety of different neck joints throughout our range. Our set-neck recipe is the classic and time-tested Mortise and Tenon joint, a design that most efficiently transfers string energy from neck to body, and can often only be found on more expensive custom-built guitars. A team of experienced and dedicated craftsmen hand carves every neck joint, insuring perfect execution of this traditional technique preferred by luthiers for generations
Resinator wood is a wood composite material that is both more uniform in density and more stable than any standard wood product. These characteristics eliminate dead spots or “wolf tones” sometimes associated with conventional wood fingerboards. Resinator wood has an articulate sound similar to high quality ebony, but without any of the problems associated with ebony. It provides a stable and clear tone, and also adds higher overtones and harmonics which uniquely detail each note. Like our H-Expander truss rod, Resinator wood is a major contributor to the distinctive “Hagstrom tone”.
Hagstrom Machine Heads
Hagstrom models use 18:1 or 15:1 gear ratio machine heads based on our own designs to insure accurate tuning. Viking and HB series basses feature machine heads with a 17:1 gear ratio.
TYPE Electric Bass Guitars
SERIES Hagstrom Viking Bass Series
FINISH BLACK Gloss
BODY WOOD Ply Maple
BODY TOP Contoured
NECK WOOD Canadian Hard Maple
CONSTRUCTION Set Neck
TRUSS ROD H-Expander
FRETBOARD Resinator Wood, Radius of 15"
FRETS 21 Medium Jumbo
SCALE LENGTH 30.75" (781 mm)
NUT GraphTech Black Tusq XL, Nut Width is 40 mm
MACHINE HEADS Diecast Hagstrom Design 17:1 Gear Ratio
BRIDGELong Travel Tune-O-Matic with Hagstrom Trapeze Tailpiece
PICKUPS 2 x Dyna Rail - Viking Bass N/B
PICKUP Selector 6-Way Rotary
CONTROLS 2 x Volume / 2 x Tone
UNIQUE FEATURES Strings:0.45 - 0.95
COMES WITH Hagstrom Hardshell Case in Tan Tolex with Hagstrom Logo
FREE POSTAGE TO MAJOR CAPITAL CITIES AND METRO AREAS. DOES NOT INCLUDE REGIONAL DISTRICTS
Regional areas please email for a quote: firstname.lastname@example.org